Wyrestorm NHD-110-RX-S | WeatherTech Coated 1080p HD AV over IP Decoder with USB | Special Order
This in.Sin. model has been treated with Sealocin.s Weatherloc technology to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. The NHD-110-RX-S is IP64 rated and should not be submerged under water for any period of time. Specific installation orientation required for proper protection.
Audio and Video
Inputs: 1x 8-pin RJ-45 female | 10/100Base-T
Outputs:
1 x HDMI 19-pin HDMI type A
1 x 3-pin Phoenix Analog Audio
Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.
Audio Formats: LPCM/MPEG4 AAC stereo, 48KHz
Video Encoding: Primary Stream - H.264/H.265, configurable up to 30Mbps
1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
IR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices
USB: 2 x Type ADevice Ports, USB v1.1 for KVM applications in. bandwidth is 115200bps (routable)
Zero-configuration switch setup using unicast technology
Flexible IP address settings: AutoIP/Static/DHCP
Customizable CEC, IR or RS-232 control of connected devices
Up to 16x16 video walls with image scaling, bezel compensation and rotation
Custom “No Source” idle image upload for branded down time
Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
Infrared signal generation via API – supports Hex Global Cache format
Batch firmware update and batch settings functions offers a massive reduction on installation times
HDCP 1.4 compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)
Overview:
1080p HD Low Bandwidth H.264/H.265 AV over IP Decoder with Sealoc Protection
The NHD-110-RX-S is an AV decoder to the powerful 110 series of NetworkHD components. This “S” model has been treated with Sealoc’s Weatherloc technology to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. The 110 series components support either H.264 or H.265 video encoding/decoding of up to 1080p60Hz content. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.
High-Efficiency H.265 encoder, commonly known as MPEG-H Part 2, is a video compression standard developed as part of the MPEG-H project to replace the widely used Advanced Video Coding.